When the check engine light comes on, there's something off in your vehicle. A check engine light might indicate a problem.
It might be anything from an improperly situated gas cap to issues with the Evaporative Emission Canister Purge Valve (EVAP). You have no way to know the magnitude of the situation. The only solution is to take your car to a mechanic.
We hope that your mechanic is reputable. However, we've all heard about incidents when a large bill resulted from something relatively minor that maybe the owner could have fixed himself.
One way you can check the validity of the mechanic's diagnosis is getting your own Foxwell NT301 Diagnostic Code Reader. It could save you both time and money.
What Is An OBD-II Diagnostic Code Reader?
The Foxwell NT301 is an Onboard Diagnostics II (OBD-II) code reader. OBD-II is the system the computers in vehicles use for reporting and self-diagnostics.
This standardized setup was developed because of regulations enforced by the California Air Resources Board (CARB). OBD-II specifications were implemented by the Society of Automotive Engineers (SAE).
OBD-II systems use the same code designations, communication protocols, and connectors for all vehicle manufacturers.
This synchronization means that the scanner can provide information about all models and makes of vehicles since 1996. OBD-II code readers are devices that can read and clear codes from a car or truck that has the OBD-II setup.
Foxwell NT301 Specifications
The Foxwell NT301 has been specially designed for home vehicle diagnostics. It's easy to use. All you do is plug in the interface cable and hit Enter. The Foxwell NT301 is small enough to hold comfortably in your hand.
It has a sturdy design with a durable rubber edging. It weighs 10.4 ounces and measures 8.7 x 3.1 x 6.7 inches. The keypad, hotkeys, and menu-driver navigation make it easy even for a beginner to use.
The Foxwell NT301 has a 2.8-inch thin-film transistor (TFT) color screen. It’s powered by the vehicle it is diagnosing using the car scan interface cable.
The reader can read and erase codes while accessing information from the Engine Control Unit (ECU), which is what triggered the check engine light in your vehicle. After the problem has been fixed, the NT301 can erase the codes to turn off the check engine light and reset the monitor.
The Foxwell reader supports generic, manufacturer-specific, and pending code requests. It can read the engine condition freeze frame data, including engine coolant temperature and fuel trim, stored at the time the alert was triggered.
It can read, graph, record, and log live sensor data and oxygen sensor monitor test data.
The red, yellow, and green LED notifications let you know when it's time for a smog check. It can help in diagnosing intermittent issues by recording Parameter IDs for comparative purposes. The Foxwell reader can give you confirmation that repairs have been completed during a drive cycle.
Live data is available both in text and graph forms. The automatic vehicle identification number (VIN) retrieval makes it simpler to read the manufacturer specific codes.
If you are unable to figure out the problem after running a diagnostic with the Foxwell NT301, you can print out the data to give to your mechanic. The NT301 can be updated using your computer and Windows OS with the Lifetime Free software update.
How Foxwell NT301 Compares
Foxwell NT301 Code Reader
- 【Vehicle CEL Doctor】Locate bad O2 sensor, turn off check engine light, reset monitor, read enhanced...
- 【Accuracy】Live data in both graph and text forms. Accurately read and clear vehicle error codes for Worldwide cars,...
- 【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Supports data logging feature and the ability to...
Ease of Use
The Foxwell NT301 works on all light-duty trucks, cars, SUVs, hybrids, and minivans manufactured and sold worldwide since 1996. The reader is ready to use immediately. No downloads are necessary to enable it.
The code definitions and menu options are available in several languages, including French, English, Spanish, German, Dutch, Russian, Portuguese, Hungarian, and Italian. The latest fixes and parameters can be updated via the internet without charge. Foxwell provides a limited one-year warranty for its product.
There are a few limitations to the Foxwell NT301 code reader. While it works on almost all electronic engine systems, it can not diagnose issues other than those related to the engine like airbag problems. If your car uses OBDI rather than the OBD-II system, the Foxwell reader will not be able to interact and diagnose issues or provide freeze frame data.
Even though the updates are free, you must have Windows 7 or higher operating systems to download the information. Mac users are out of luck. If you are a newbie at car diagnostics, you may find using the reader and reading the data to be challenging.
BlueDriver LSB2 Bluetooth Pro OBDII Scan Tool
- Read and clear your Check Engine Light and all other vehicle systems. Get your unlimited free vehicle specific Repair...
- As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your...
- Officially licensed and certified for Apple and Android devices
Ease of Use
BlueDriver LSB2 Bluetooth Pro OBDII Scan Tool for iPhone/Android not only reads and clears confirmed, pending and permanent codes but also provides you with possible causes and vehicle-specific reported fixes. It can give you a freeze-frame vehicle snapshot and let you know when your car is ready for a smog test.
Each data source can be shown as a gauge, graph, or digital display. Colors are customizable. Important vehicle information, including maintenance schedules, recalls, and specifications are available for your specific vehicle. In addition to engine issues, transmission, brake, and airbag problems can be diagnosed with BlueDriver.
The BlueDriver App is available for both Android and iOS. Updates are free. Live data can be logged and exported as a file for your mechanic.
Unfortunately, BlueDriver is only available for GM, Ford, Mazda, Chrysler, Toyota, and Nissan models. It is also compatible with BMW, Honda, and Volkswagen 2005 and newer models sold in North America.
Ancel AD410 Enhanced OBD II Vehicle Code Reader
- WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel. Works on most vehicles sold in the USA...
- CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code...
- ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be...
Ease of Use
The Ancel AD410 Enhanced OBD II Vehicle Code Reader works on most vehicles 1996 or newer sold in the United States. The menu displays in German, Spanish, Finnish, English, French, Russian, Dutch, and Portuguese. The Ancel AD410 supports EVAP and O2 Sensor System Tests.
The LCD TFT actual color screen makes it easy to read the test results. The review and print option will allow you to print or save diagnostic reports for your mechanic. The software updates are free.
The Ancel AD410 Enhanced OBD II Vehicle Code Reader will only work with vehicles with 12-volt batteries. They must be 16 PIN OBD-II protocol as well. It can not read or clear SAS or ABS error codes.
The Foxwell NT301 Code Reader is a useful diagnostic tool for anyone who does some maintenance on his or her vehicle. It may not be simplistic enough for beginners, nor does it provide reported fixes, so it is best used by those who know their way around under the hood.
The Foxwell NT301 Code Reader isn't able to diagnose all vehicle issues. However, having an idea of what is wrong when the check engine light comes on can potentially save you thousands of dollars in repairs. We rate the Foxwell NT301 4 out of 5 stars.
Featured Image via Amazon